$4.95 U.S. shipping per order · 90-day money-back promise

Will my drink fit Steadi?

Steadi fits container bases from 2 to 3.15 inches across, inclusive. That is 50.8–80.01 mm. Measure the bottom of your container, not its rim. Check handle clearance as well as width.

Which cup holder dimensions matter?

Steadi’s footprint is 5.2 inches across. That is the space needed under the holder; it is different from the drink-fit range of 2–3.15 inches across the container base. A cup’s capacity in ounces does not establish its base diameter. Measure your drink and leave enough reasonably level, supported space for the holder’s full base.

Drink base: 2–3.15 in

Measure across the bottom.

Holder footprint: 5.2 in

Allow space for the whole holder.

Schematic, not to scale. Drink capacity and rim width do not establish fit. Check handle clearance too.

Steadi dimensions and material

  • Overall height: 2.8 inches.
  • Footprint: 5.2 inches across.
  • Weight: about 3.6 ounces per holder.
  • Material: thermoplastic polyurethane (TPU), Shore 85A hardness. BPA free.
  • Care: hand wash only. Do not put Steadi in the dishwasher or microwave.

The 5.2-inch footprint is the space under the holder; it is not the drink-fit diameter. The confirmed container-base range is 2–3.15 inches, inclusive, with handle clearance and proper seating also required.

How to measure your cup

  1. Empty the container and turn it over.
  2. Place a ruler across the center of its circular base, from one outside edge to the other.
  3. Check that the base measures at least 2 inches and no more than 3.15 inches.
  4. Check that any handle clears Steadi’s fins and allows the container to seat properly.

For an irregular base or a measurement close to either limit, ask us before ordering. Send the exact model, base measurement, and a side photo to hello@steadilabs.com.

What does your base measurement mean?

Use these examples after measuring across the center of the bottom. They check diameter only; shape, handle clearance and proper seating still matter.

Measured baseWithin Steadi’s size range?Next step
1.9 inchesNo—below the 2-inch minimum.Choose different drinkware; do not assume the fins will grip it.
2 inchesYes—at the lower limit.Confirm the measurement, shape and handle clearance.
3 inchesYes—inside the range.Check that any handle allows the container to seat properly.
3.15 inchesYes—the upper limit is included.Measure carefully; ask us if the reading or shape is uncertain.
3.2 inchesNo—above the 3.15-inch maximum.Do not round down or force the container into the holder.

These are measurement examples, not tests of five specific drink models. A listing that gives only the cup’s rim width or capacity does not provide the measurement you need.

Why a three-inch sticky note is not a fit test

A base can extend past a three-inch note and still be within the confirmed 3.15-inch maximum. A small base can sit inside that note yet be below the two-inch minimum. Use a ruler to check both limits.

Stanley, Owala and YETI: check the exact model

A brand makes many different shapes. Start with the model and size printed on your drinkware, then compare its base with Steadi’s 2–3.15-inch range. Here is what is confirmed and what manufacturer dimensions can tell you.

Stanley Quencher H2.0 FlowState, 40 oz

This exact model is confirmed to fit Steadi. Stanley lists a 3.1-inch base diameter. That confirmation does not cover every Quencher version or every 40 oz tumbler. For a snug fit, pull Steadi off the container when removing it.

Owala 24 oz Tumbler

Owala lists a 2.81-inch base diameter for its 24 oz Tumbler. That published measurement is within Steadi’s size range. It is a dimension check, not a confirmed seating test with Steadi. Check your exact tumbler’s bottom and shape before ordering; a bottle boot changes the measurement. This specification is not for the FreeSip bottle.

YETI Rambler Travel Mug, 20 oz or 30 oz

YETI’s Travel Mug FAQ lists a narrowest diameter of 2.75 inches for the 20 oz mug and 2.73 inches for the 30 oz mug. It also lists bottom-to-handle heights of 3.75 and 4.36 inches, respectively. These are useful starting measurements for those Travel Mugs; they do not establish how the full lower shape seats in Steadi. They are not specifications for every Rambler Tumbler, Bottle or Lowball. Measure your exact mug’s base and check handle clearance.

Unsure about your version? Send the model, capacity, bottom measurement and side photo to hello@steadilabs.com. We can help you check the combination before you order.

Manufacturer specifications checked October 6, 2026. Dimensions alone do not establish spill resistance or performance on your couch or bed.

What about cans, bottles, and mugs?

Standard 12 oz cans are confirmed. Other drinkware should be checked by exact base size and shape. A low handle on a ceramic mug can interfere with the fins even when the base width is in range. A higher handle can clear them; do not rule all handled drinkware in or out.

Irregular bases, small cups and sleeves

A tapered, recessed or irregular bottom may need more than one measurement to understand how it seats. Diameter is an initial check, not proof of a secure fit. Send the exact model and side and bottom photos if the shape makes the measurement unclear.

A slim-can label, a child’s cup design or a capacity in ounces does not establish fit. Apply the same 2–3.15-inch base range and handle-clearance checks. A koozie or sleeve changes the assembled dimensions and seating; do not assume a container that fits bare will fit with one added.

If fit changes after use or a container feels loose, use the fit and grip troubleshooting checklist. Do not force an uncertain combination.

Fit and stability are different checks

A compatible container still needs a reasonably level supported spot under Steadi’s full base. A hard knock, moving bedding, a steep cushion, or an overfilled drink can cause spills. Steadi helps resist tipping; it is not spillproof.

What counts as a confirmed fit?

The confirmed size range is 2–3.15 inches across the container base, with handle clearance and proper seating also required. Standard 12 oz cans and the exact 40 oz Stanley Quencher H2.0 are confirmed examples. A matching capacity or brand name alone does not confirm a different model.

A photograph can show one container seated in a holder. A customer review can describe one person’s experience. Neither establishes the dimensions of every container sold under that brand or guarantees the same result with a different version. When the exact model or measurement is uncertain, use the measuring steps above and ask Steadi Labs before ordering.

See what our product demonstrations show and how their examples differ from a measured compatibility check.

Frequently asked fit questions

Does a 3.15-inch base fit?

Yes. The confirmed range includes 3.15 inches. Check handle clearance and seating too.

Does a base smaller than two inches fit?

It is outside the confirmed fit range. Do not assume the fins will hold it securely.

Should I measure the rim or the bottom?

Measure across the bottom. A wide rim does not tell you the base diameter.

Shop Steadi · Compare couch cup holder types

2-Pack — $14.95 $4.95 U.S. shipping · checkout on steadilabs.com
Choose colors